PRODUCT INFORMATION
All our terminal boxes and control stations can be mounted directly on AF and BF models or as stand-alone solutions.
•Material: SS316, SS304 or GRP
•Certification: ATEX and IECEx
•Large selection of push buttons, lamps and selectors
•Systems fully wired, configured and tested
•Optional vent/drain
•Optional lamptest
•Painted
All our terminal boxes and control stations are custom made for all projects to give the best function.

LOCAL CONTROL PANEL FUNCTIONS
Remote/local selector: It is possible to connect a remote/local selector. When the selector is set on remote it is controlled by the main SCADA system. When the selector is set on local, it is possible by using the manual valve control buttons described below to move the actuator to the desired position.

Manual valve control: This feature gives the possibility to connect two buttons, open/close to be able to move the actuator manually when the remote/local selector is set to local.

End position indicator: This functions offers control of 2 outputs to show if the valve is open or closed. It is possible to connect two 24VDC lamps to give this information to the user.

Test fail/Test warning/Test pass/Test in progress: Indicator showing test status.
Start test/abort test: Input starting a test sequence. Buttons for more different test can be added. The same or a separate button can be used to abort the test.

Error: This function signals if an error has occurred in the system.

ESD: When this input is set low, all outputs will be de-energized.

Reset/Ready to reset: Functions for starting up ESD systems.

Pump manual start: This feature gives the possibility to connect one buttons to be able to start the pump when the remote/local selector is set to local.
More functions available, see specific product for more information.